Surface Preparations
Remove weathered finishes to reveal new looking wood with this ready-to-use cleaner. Removes weathered, clear and tinted waterproofers along with semi-transparent stains. Restores wood's natural color and beauty. Removes dirt, mildew, algae, and fungus stains. 1 gallon plastic container cleans approximately 150 to 200 Sq. Ft. Do Not use in pressure washer or metal containers. Apply with brush or polypropylene deck sprayer. Do not thin.
1G MOLD STAIN REMOVER
64OZ MOLD STAIN REMOVER
This is an 20 degree baume 31.45\% concentration hydrochloric acid. Uses include balancing the PH level in swimming pools, cleaning brick and mortar, and etching concrete.
This is an 20 degree baume 31.45\% concentration hydrochloric acid. Uses include balancing the PH level in swimming pools, cleaning brick and mortar, and etching concrete.
Removes and prevents rust in 1 step. Removes hard water, calcium, and lime deposits. Water-based formulation penetratesinto every void of a metal surface and dissolves rust and oxidation through chemical action. When dry, Must For Rust accepts any primer, paint, coating, plating, welding, etc. Provides a clean surface free of contaminants. Safe, fast, effective on rusted or new metals, chrome, brick, concrete, stucco, fiberglass, porcelain, ceramic, and glass. Not for use on marble.
OSPHO is a rust-inhibiting coating not a paint. OSPHO causes iron oxide (rust) to chemically change to iron phosphate an inert, hard substance that turns the metal black. Use on new metals, for new ferrous or aluminum metals. Is effective for exterior and interior work alike. Recommended for use under oil-base primers and paints. Test a small area before using under epoxy or latex base paint. Covers approximately 600 Sq. Ft. per gallon. Normally requires overnight drying before topcoating. Contains phosphoric acid. Keep out of reach of children. Use adequate ventilation in confined areas, skin and eye protection should be used.
OSPHO is a rust-inhibiting coating not a paint. OSPHO causes iron oxide (rust) to chemically change to iron phosphate an inert, hard substance that turns the metal black. Use on new metals, for new ferrous or aluminum metals. Is effective for exterior and interior work alike. Recommended for use under oil-base primers and paints. Test a small area before using under epoxy or latex base paint. Covers approximately 600 Sq. Ft. per gallon. Normally requires overnight drying before topcoating. Contains phosphoric acid. Keep out of reach of children. Use adequate ventilation in confined areas, skin and eye protection should be used.
Destroys rust and leaves a tough coating that can be painted without another primer. Seals and protects metal. Remove loose rust with coarse sandpaper or wire brush. Surface must be clean, dry and free of grease, dirt and oil. Spray or brush Extend onto rusty surface and allow to dry overnight before top coating. Spray can is handy for hard-to-reach areas or detailed objects such as lawn furniture and hand rails.
Removes rust from metal surfaces and removes bluing from surfaces such as guns, reels, etc. Remove loose scale with coarse sandpaper or wire brush. Apply Naval Jelly liberally to rusty surface that is free of dirt, oil and grease. Wipe off immediately from painted surfaces. Allow to work for 15 to 30 minutes and rinse off. Repeat application on heavily corroded surfaces. Limit application time to 5 minutes when used on chrome or other plated surfaces.
Prepares concrete surfaces for painting. Granular material requires only mixing with water, it also removes efflorescence from masonry. Cleans mortar from brick and ceramic tile and etches galvanized surfaces for painting. Made from sulphamic acid. Contains No Muriatic Acid.
A concentrated, biodegradable cleaner formulated to remove dirt, chalk, and mildew stains from aluminum, vinyl, steel, wood, stucco, and masonry. Besides homes and commercial buildings, it may be used to clean boats, RV's, mobile homes, and outdoor furniture. It is recommended that bushes and flowers be covered when using siding cleaner. 1 gallon of cleaner makes up to 32 gallon of cleaning solution. It is important to rinse after applying cleaning solution.
Removes tough stains such as mildew, mold, dirt, and grease on most exterior surfaces including roofs, siding, decks, and driveways. No bleach or ammonia. Safe for people, pets, and plants. To apply, put valve in the clean position and apply from top to bottom. Allow cleaner to work on surface 5 to 10 minutes. To rinse, put valve in rinse position and turn hose on full pressure. If surface is extremely soiled, it may be necessary to scrub surface with a bristle brush and apply a second time. 1 Gal. cleans 4000 Sq. Ft. and can be applied by pressure washer, pump-up sprayer, brush, or roller. 56 Oz. bottle has convenient hose end attachment.
Wood bleach contains oxalic acid which, when mixed with 1 gallon of hot water, effectively bleaches unfinished or stripped wood quickly and easily. Wood bleach is excellent for removing black water spots and tannin stains in wood. Use on all unfinished woodwork, floors, doors, etc., to lighten wood or match different wood colors. 12 Oz. container makes 1 gallon of mixture. Covers 200 Sq. Ft.
Chemically converts rust to a protective coating. Eliminates the need to sand rust to bare metal. After application, rust is transformed into a black, rust inhibitive and paintable coating. 8 Oz.
Ideal for pressure treated wood, plastic/wood composites and weathered cedar and redwood decks, fences, and more. Ultra-oxidizer, strongest wood cleaner of it's kind, deep cleaning foam restores and brightens in minutes without chlorine bleach. Restores weathered wood to it's bright, natural look by removing embedded dirt, grayed surface and stains from mildew, mold, and algae. Rids new wood of surface wax or mill glaze-eliminates barriers to penetration, adhesion and long-term performance. Prepares all wood for sealing or staining. Formulated with special thickeners that cling to vertical surfaces and hard-to-reach areas. Environmentally safe formula is acid-free and chlorine-free. 100\% biodegradable which is safe to use near grass, plants, and shrubs. Fast acting cleans in 10 minutes. Easy to use pouch will make 2.5 Gal. and cover 375 Sq. Ft. A 3 Lb. jar will make approximately 7 gallon of mixture and cover 1125 Sq. Ft. Just mix with water, spray, brush, and rinse.
Rust remover gel is a cleaner, safer, and easier rust remover for iron and steel. It is non-toxic, environmentally friendly, and contains no harmful or corrosive acids, alkalis, or solvents. High adhesive formula allows for simple and controlled application - gel clings to metal. Gel must remain moist to remove rust. One jar covers approximately 230 Sq. In. of surface area. Good for 1 year after opening.
The Rust-Oleum Wipe New Recolor Kit instantly restores color and shine to faded surfaces in minutes while providing protection from weather exposure and elements. Long lasting formula will continue to protect from UV and liquids. Easy to use; no taping, sanding or disassembly required. Dries to the touch in 1 hour and fully cured after 24 hours. Kit includes: 5 Wipe-its, gloves and instructions.
Powdered concentrate that mixes with water. Makes 5 gallons. Environmentally friendly. Safely cleans, brightens and restores exterior wood. Removes stains caused by mold, mildew and algae along with silver gray color that develops over time. Coverage: 600 to 1000 Sq. Ft. Mix 6 Oz. cleaner to 1 Gal. water.
Metal Rescue Rust Remover Bath is your clean, safe and easy solution to removing rust from iron and steel. Metal Rescue Rust Remover Bath will take rust off the most heavily corroded metal parts, yet it is safe enough that you can put your bare hands into it. Metal Rescue is most effective when used as a bath or soak, simply immerse metal part in a plastic container for 5 minutes to 48 hours depending on the severity of the rust. Easy to use, virtually no labor involved (no scrubbing, dipping, brushing or other agitation). Just soak, check, and dry. No acids, no caustics, no health risks, non-toxic and safe on skin. Metal Rescue does not remove properties of the metal, does not etch the metal like an acid, leaves metal surface intact and less susceptible to return/flash rusting.